Donkey Harness and Tools |
High Lift Harness This is made from nylon webbing 40-50 mm wide and stitched using nylon thread. The breast band is double width to spread the load. The size of a donkey will vary according to the available grazing so an adjuster is used with each yoking to ensure the harness is a good fit.
Inter Row Weeder This tool is made from scrap car springs carefully ground and welded to provide the optimum angle of approach for good penetration. Mould Board Plough This is no longer used in many areas due to its effect on soil moisture loss as it turns the soil. This model was made by hand using a jig for the curve of the mould board. The share is an old car spring. |